SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTION
1) Read these instructions.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
2) Keep these instructions.
3) Heed all warnings.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install
in accordance with the instructions.
The symbol indicates that dangerous
voltages constituting a risk of electric shock
are present within this unit.
8) Do not install near any heat sources such as
radiations, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
The symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying this
unit.
9) Do not defeat the safety purpose of the
polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
WARNING:
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
10) Protected the power cord from being walked
on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
WARNING:
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the
like.
11) Only use attachments/accessories specified
by the manufacturer.
12) Unplug this apparatus during lighting
storms or when unused for long periods of time.
WARNING:
13) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
The excessive sound pressure from earphones
and headphones can cause hearing loss.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user accessible
parts. When servicing use only
14) Mains plug is used as the disconnect device,
the disconnect device shall remain readily
operable.
identical replacement parts.
15) The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted
candles, should be placed on the apparatus.
17) Attention should be drawn to the
environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
19) The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
the apparatus.
-2-
SAFETY AND WARNINGS
High voltages are used in the operation of this television
receiver. Do not open the cabinet.
Refer servicing to qualified service personnel.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual and/or damage
to the television may result if it falls.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Do not block the ventilation holes on the back cover of the TV.
Adequate ventilation is essential to prevent failure of
electrical components.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
or near the television.
Dim:515*320mm(ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
）
Do not trap the power supply cord under the television
receiver's stand.
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the life of your television, and can also
be dangerous.
-3-
INTRODUCTION
Accessories
Main features
■
■
■
■
Integrated ATSC TV tuner for HDTV broadcast reception
High brightness provides a vivid and brilliant picture
Deeper blacks and brighter whites with high contrast
Wide Screen aspect ratio (16:9) for a complete home
theater experience
HDMI input for true digital connection
VGA port for connection to PC
Built-in stereo speaker system
Power Cable.....................................
Infrared Remote Control....................
User’s Manual .................................
Battery(AAA)...................................
1
1
1
2
■
■
■
■
Full-function Remote Control
Main parameter
Viewing Picture Size (diagonal)
Resolution:
32 inches
1366x768
Power consumption:
120W
2x8W
Audio Output Power (THD 7%):
Input Power Voltage:
AC 100V-240V 50/60Hz
16:9
Aspect Ratio:
TV System:
ATSC Digital system and NTSC Analog system
NTSC
Video Signal System:
Receiving Channel:
Cable :1-135/ Air: 2-69 (ATV&DTV)
High-Definition Multimedia Interface (HDMI) Input
YCb(Pb)Cr(Pr) Input
x 2
x 1
Composite Video Input
Analog RGB (VGA) Input
Audio Input
x 2
x 1
x 3
Headphone Output
Coaxial Output
x 1
x 1
USB Input
x 1
Horizontal definition (TV line)
Composite Video Input >=350
Video Input
>=400
>=400
YCb(Pb)Cr(Pr)
-4-
STAND INSTALLATION GUIDE
This STAND INSTALLATION GUIDE is provided to help you easily install the stand. Please carefully follow
Step 1 through Step 3.
Open the box and find the parts
Open the box and find the following parts.
Screws
Packing
-
-
Stand x1 pc
Screws x 4 pcs
Stand
TV
Stand
Packing
Place the Stand on the TV
2. Place the Stand on the TV as shown below.
1. Place the TV with the display side down
on a table or desk (flat, totally clean surface).
Stand
Secure the Stand to the TV
Secure the Stand to the TV by using the 4 supplied screws.
1
2
3
4
-5-
INSTALLATION
Side panel
Front panel
3
SOURCE
1
2
MENU
CH+
3
1
2
CH-
VIDEO
6
VOL+
VOL-
4
5
VIDEO
L
R
7
8
STANDBY
L
R
30 30
1. SOURCE: Display the input source menu.
2. MENU: Display main MENU.
3. CH+/CH-: In TV mode, press "CH+" or "CH-" to
change the channel up and down. In MENU mode, press
"CH+" or "CH-" to select items in standby mode, press
"CH+" or "CH-" to turn on the TV.
4. VOL+/VOL-: Adjust sound level. In MENU mode,
press "VOL+ " or "VOL- " to adjust the item that you
selected.
5. STANDBY: Press this button to turn the unit ON
from STANDBY mode. Press it again to turn the set
back to STANDBY.
1: Remote control sensor.
2: Indicator LED: GREEN
RED
POWER ON.
STANDBY.
3: Side panel keys
6. VIDEO INPUT
7. AUDIO INPUT-L
8. AUDIO INPUT-R
REAR AV INPUT/OUTPUT
HDMI
1
HDMI
2
HEADPHONE
PC AUDIO
INPUT
COAXIAL
RF INPUT
VGA INPUT
Pr COMPONENT Pb
INPUT
AUDIO
INPUT
L
AC INPUT
100-240V~50/60Hz
AV1
Y
R
10
11
1
2
3
4
5
6
7
8
9
1. HDMI1 Input
2. HDMI2 Input
3. Composite Video Input
7. Headphone Output
8. PC Audio Input
9. Coaxial
4. Component Video (YPbPr) Input
5. Audio Input
6. VGA Port (PC Input)
10. Antenna Socket
11. AC Power Socket
Note: 1. Composite video input and component video input share the audio input.
2. When HDMI1 has an input signal coming from a DVI source then the audio input signal must be
connected to the PC audio input.
3. When HDMI2 has an input signal coming from a DVI source then the audio input signal must be
connected to the YPbPr/AV audio input.
-6-
INSTALLATION
PC
STEPS:
Be sure both the TV and computer are powered off.
1. Connect a VGA and audio cable.
2. Connect the power cord.
3. Turn on the TV and switch to VGA mode.
4. Turn on the PC.
HDMI
1
HDMI
2
HEADPHONE
PC AUDIO
INPUT
COAXIAL
RF INPUT
VGA INPUT
Pr COMPONENT Pb
INPUT
AUDIO
INPUT
L
AC INPUT
100-240V~50/60Hz
AV1
Y
R
PRESET MODE
V.Freq.(Hz)
H.Freq.(KHz)
RESOLUTION
1
2
3
4
720*400
640*480
70
60
31.47
31.47
37.50
37.88
46.88
48.36
75
60
75
60
640*480
800*600
800*600
1024*768
5
6
7
8
9
1024*768
1024*768
70
75
56.48
60.02
1280*1024
1280*1024
60
75
63.98
80.00
10
11
1366*768
75
80.00
-7-
INSTALLATION
ANTENNA
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.
-8-
INSTALLATION
AV EQUIPMENT
There are two HDMI ports located on the back of your TV. You can connect a Blu-ray player, DVD player, or other video
equipment through these ports.
There is one component (Y, Pb, Pr) and two composite (AV) video input located on the back of your TV. You can connect
a VCR, cable box, or other video equipment to these jacks.
Please see the diagram below. You may also need to refer to the owner's manual of the device that you are trying to connect.
VIDEO EQUIPMENT with YPbPr
G
B
R
W
R
Y
W
R
Yellow (video)
White(audio L)
Red(audio R or Pr)
Blue(Pb)
B
G
Green(Y)
G
B
R
R
W
HDMI
1
HDMI
2
HEADPHONE
PC AUDIO
INPUT
COAXIAL
RF INPUT
VGA INPUT
Pr COMPONENT Pb
INPUT
AUDIO
INPUT
L
AC INPUT
100-240V~50/60Hz
AV1
Y
R
W
R
HDMI
VIDEO EQUIPMENT
W
R
TO VIDEO
output
To audio outputs
The television's inputs can be connected to the following types of equipment: VCR, multi disc player, DVD, camcorder,
video game or stereo system, etc.....
There is a composite (AV) video input . You can use this AV input to
conveniently connect devices that you may frequently connect and disconnect, such as a camcorder.
-9-
REMOTE CONTROL
1: POWER
To turn the TV on.
2: NUMBER KEY
For direct access to channels
.
3:
Displays the main on-screen menu.
4: CURSOR
To move within the menu.
5: EXIT
To exit the menu.
6: VOL+/-
To adjust sound level.
7: P.M
To switch picture mode.
8:
Press to display and select the available video sources.
9: MUTE
To disable or enable the sound.
10: RECALL
To access the previously viewed channel.
11: ENTER
Confirms selection.
12: TV DISPLAY
Displays/removes the program information
13: S.M
To switch sound mode.
14: CH+/CH-
To access the next or previous channel.
15: ASPECT
To change picture aspect .
16: CH LIST
To display the channel list.
17: EPG
To display all the information of DTV programs.
18: FAV
To access your favorite channels in digital TV mode.
19: HDMI
Hot key to go directly to HDMI source.
20: AV
Hot key to go directly to AV source.
21: DTV STRENGTH
To display the DTV signal strength menu.
22: TV
Hot key to go directly to TV source.
23: YPbPr
Hot key to go directly to YPbPr source.
24: CC
To enable or disable the CC function.
25: VGA
Hot key to go directly to VGA source.
26: MTS
To switch the sound stereo.
27: COLOR KEYS
Reserved keys
-10-
OPERATION
1. PICTURE MENU
3. SETUP MENU
The first item of the MENU is PICTURE MENU.
You can adjust picture effect here, such as contrast,
brightness, etc.
The third item of the MENU is SETUP MENU.
You can setup system here.
Press
to exit.
to select, press
to adjust, press MENU
Press
to exit.
to select, press
to adjust, press MENU
Note:
Restore Default: Reset all the settings to default
value.
Note:
If you want to adjust contrast, brightness, color,
and sharpness , the picture mode must return to
“Custom”status.
3.1. Parental Controls:
Press button to select Parental Controls, Press
button, the screen will display as follow:
Advanced Video:
Press button to select Advanced Video, press
button, the screen will display as follow:
Enter the password, it will go into Parental Control
menu. Factory default password is 6666.
2.AUDIO menu
The second item of the MENU is AUDIO MENU.
You can adjust sound here.
Press
to exit.
to select, press
to adjust, press MENU
RAW
Note:
Audio language is available in ATSC/TV Programming
only.
-11-
OPERATION
Change Password:
Press
button, the screen will display as follow:
Content
S
(Fantasy (Violence) (Sexual
FV
V
L
(Adult
D
(Sexually
Rating Content
violence)
situation) language) suggestive
dialog)
TV-Y (All
children)
TV-Y7(Direct to
order children)
X
Suggested
age
TV-G(General
audience)
TV-PG(Parental
Guidance
suggested)
X
X
X
X
X
X
X
X
X
X
X
TV-14(Parents
strongly
cautioned)
TV-MA(Mature
audience only)
1).Old password: Input the old password
2).New password: Input the new password
3).Confirm password: Input the new password again
And use the ENTER key to switch lock/ unlock Parental
Control feature.
P.G Switching:
When the Parental Control switch is ON, the below
options listed below can beadjusted.
2).MPAA: Switching the movie-rating control level;
N/A, G, PG, PG-13, R, NC-17, X.
US: Press
follow:
button, the screen will display as
Rating
Description
G
General audiences, All Ages admitted
Parental Guidance suggested. Some material may not be
Suitable for children.
PG
Parents strongly cautioned. Some material .may be
Inappropriate for children under 13.
PG-13
R
Age
Restrict. Under 17 requires accompanying parent or adult
guardian(age varies in some jurisdictions)
NC-17
X
No one 17 and under admitted.
X is an order rating that is unified with NC-17 but may be
encoded in the data of order movies.
Canada: Press button, the screen will be
displayed as follow:
1:TV: Press button, the screen will display as
follows:
1): Canada English: Switching the English rating control
level: EXEMPT, C, C8+, G, PG, 14+, 18+.
-12-
OPERATION
3.2 Timer
Description
Rating
You can adjust the timer here.
to select, press
Press
to exit.
to adjust, press MENU
E
C
Exempt: Includes news, sports, documents and other information
programming: talk shows, music videos, and variety programming.
Children: Intended for younger children under the age of 8 years.
Pays careful attention to themes that could threaten their sense of
securityand well-being.
C8+ Children over 8 years old: Contains no portrayal of violence as the
preferred, acceptable, or only way to resolve conflict; nor encourage
children to imitate dangerous acts which they may see on the screen .
G
General: Considered acceptable for all age groups, Appropriate
viewing for the entire family, contains very little violence, physical,
verbal or emotional.
PG
Parental Guidance: Intended for a general audience, but may not be
suitable for younger children (under the age of 8) because it could
contain controversial themes or issues.
Age
14+
Over 14 Years: Could contain themes where violence is one of the
dominant elements of the storyline But it must be integral to the
devel opment of plot or character. Language usage could be profane
and nudity , present within the context of theme.
18+ Adults: Intended for viewers 18 years and older and might contain
depictions of violence, which while related to the development of
plot, character or themes, are intended for adult viewing. Could
contain graphic language and portrayals of secretary and nudity.
Sleep Timer: Adjust this item to set the sleep timer.
Note:
Time zone, DST and the clock are available in ATSC
programming only, and the Clock can't be adjust.
2).Canada French: Switching the French-rating control
level: E, G, 8ANS+, 13 ANS+, 16ANS+, 18ANS+.
3.3 Closed Caption: Switching close caption mode.
Rating
Description
Press button to select Closed Caption, Press
button, the screen will display as follow:
E
Exempt programming
G
General :All ages and children, contains minimal direct violence,
but may be integrated into the plot in a humorous or unrealistic
manner .
8ans+ General but inadvisable for young children :May be viewed by a
wide public audience, but could contain scenes disturbing to
children under 8 who cannot distinguish between imaginary and
real situations. Recommended for viewing with paren.
Age
13ans+ Over 13 years: Could contain scenes of frequent violent scenes
and in tense violence.
16ans+ Over 16 years: Could contain frequent violent scenes and violence.
18ans+ Over 18 years: Only for adult viewing. Could contain frequent
violent scenes and extreme violence.
RRT setting: in ATSC digital TV mode, it can be
adjusted
1):Advanced selection: only ATSC program is available.
2):Option: Used to edit CC font.
Reset RRT: Press
displayed as follow:
button, the screen will be
Press
button, the screen will display as follow:
NOTE: Only ATSC program is available.
-13-
OPERATION
3.4 Menu Settings
You can adjust the Menu Settings here.
to select, press
1). Air/Cable: select Air TV signal and cable TV signal.
2). Auto Scan: If it's the first time you use the TV, you
should scan all the TV channels first,
Press
to exit.
to adjust, press MENU
press the
menu:
button to confirm, you will see the
3.5 VGA Settings: When PC Mode is available.
Press button to select VGA Settings, Press
button, the screen will display as follow:
select“yes”item and press the ENTER button to
confirm, You will see the message below which
indicates auto search is in process.
1).H-Pos: Adjust the horizontal position of the screen.
2).V-Pos: Adjust the vertical position of the screen.
3).Clock: Fine tune the screen width.
4).Phase: Fine tune the phase of the screen. Usually
don't adjust this item.
5).Auto: Auto adjust to fit the screen.
3). Favorite: Press
favorite channel .
4). Show/Hide: Press
current channel.
5). Channel NO. :Display the current channel number.
6). Channel label: Press
name.
button to choose/delete the
button to display or hide
4. Channel MENU
The fourth item of the MENU is Channel MENU.
You can adjust digital and analog TV Channels.
button to edit current channel
Press
to select, press
to adjust.
7). DTV signal: Display DTV strength signal. It can't be
selected and adjusted.
-14-
|